Serving Whitby, Brooklin, Ajax & Pickering

Free written estimates · +1 289-307-8672

Answers

Ten Rubber Surfacing Answers

Below are answers on cost, winter, granules, depth, curing, what it goes over, cracks, upkeep, playground depth and timing.

Still Have A Question?

Call us at +1 289-307-8672 and ask about your slab. A free site visit answers the rest.

Answers

Frequently Asked Questions

In Durham Region, rubber surfacing laid over a pool deck, patio, step, walkway, driveway or garage floor that already exists commonly costs $8 to $16 a square foot. Playgrounds are poured far deeper, so they cost $15 to $30 a square foot and sometimes more. Depth, colour, binder, the state of the slab and the size of the job all shift the figure, and there is a minimum charge on small jobs. The number that counts is the written quote that follows our free visit.

Outdoor rubber surfacing needs the surface above about ten degrees and dry, and it cannot be rained on while it cures, which puts the outdoor season in Whitby between the last week of April and mid-October. Indoor jobs, such as garage floors, basement gyms and barn aisles, go in all year.

EPDM is new rubber, coloured through the whole granule and steady in sunlight, so it goes on any surface that shows. SBR is ground from old tires, black and lower in cost, and it goes into cushion layers under playgrounds and black floors in garages and gyms. TPV is a newer coloured granule some installers use in place of EPDM.

Pool decks, patios, steps, walkways and driveways get between three-eighths and half an inch of rubber. Garage floors and gym floors get thicker, three-eighths of an inch up to three-quarters. A playground can get anything from one and a half inches up past four, depending on how high the equipment stands.

New rubber surfacing takes feet the day after it is poured. Cars, racks, horses and heavy use wait two to three days. Thick playground pours are kept clear a little longer, and we confirm the date before we leave.

Stamped concrete, plain concrete, asphalt, interlock and pavers, wood decks, packed stone and older rubber can all take rubber surfacing on top. Whatever is underneath must be solid, clean and dry, with sealer, paint and oil removed. It is not torn out; it becomes the base.

Rubber surfacing is flexible and moves with the slab, so hairline and static cracks vanish beneath it. A crack that widens every spring must be repaired before the pour, or the rubber will eventually tear along it. Our visit sorts one from the other.

Hose it or sweep it. Mild detergent handles spills, and harsh solvents are the only thing to keep off it. A plastic-edged shovel handles snow, and road salt does not scale it. Every several years a new coat of binder keeps it sealed and extends its life.

How high the equipment stands decides the depth. A low toddler structure needs cushion about one and a half inches deep; a tall climber can call for four inches or beyond. Each zone of the playground gets its own thickness in the quote.

A site visit is usually booked within the week, and the written quote follows it. Once the weather window is open, a typical home job is one or two days of work on site. Larger playgrounds and commercial floors take longer and are scheduled in the quote.

What We Install

Answers By Surface

Each service page covers the preparation and thickness for that surface.

Pale rubber surfacing around a resort-style pool with cabanas behind it.

Pool Deck Surfacing

Around an in-ground pool, the concrete, pavers or stamped deck already in place becomes the base, and we trowel pool deck rubber surfacing onto it for a cooler, softer, slip-resistant finish. Every Whitby job we take is fully insured, start to finish.

View Pool Deck Surfacing
Dark speckled rubber surfacing covering a garage floor from wall to wall.

Driveway and Garage Floor Surfacing

Salt-pitted garage floors and cracked drives, concrete or asphalt, get covered by our driveway and garage rubber surfacing, a skin that sheds water and will not scale. Every Whitby job we take is fully insured, start to finish. Whatever slab is down now is what the rubber surfacing gets poured onto.

View Driveway and Garage Floor Surfacing
Installer troweling teal rubber surfacing beneath a playground climbing structure.

Playground Safety Surfacing

Backyards, daycares, schools, churches and parks get playground rubber surfacing from us: a deep cushion layer matched to the equipment under a coloured top. Every Whitby job we take is fully insured, start to finish. The finished playground is seamless, drains, and can be crossed in a wheelchair.

View Playground Safety Surfacing
Charcoal rubber surfacing on a waterfront deck and its stairs.

Patio, Walkway and Step Surfacing

Paths and steps in concrete, interlock, stone or wood get wrapped by our patio and step rubber surfacing in one continuous skin that sheds water and holds a boot through ice season. Every Whitby job we take is fully insured, start to finish. Whatever is down now stays put as the base.

View Patio, Walkway and Step Surfacing
Seamless black rubber surfacing on a fitness studio floor beside weight racks.

Gym and Fitness Flooring

Home gyms, fitness studios, school weight rooms and arena dry-land areas get seamless gym rubber surfacing from us, glued down to the slab so it can never creep apart the way mats do. Every Whitby job we take is fully insured, start to finish. Black SBR is the standard, with colour if the room wants it.

View Gym and Fitness Flooring
Installer spreading tan rubber surfacing across a rooftop terrace.

Commercial and Equestrian Surfacing

Condo terraces, school courtyards, splash pads, seniors' residences, daycare yards and horse barns from the harbour to the farms north of Brooklin all fall under commercial and equestrian rubber surfacing, and each one is measured and quoted in writing. Every Whitby job we take is fully insured, start to finish.

View Commercial and Equestrian Surfacing
Free Estimate

Send Us The Slab Details

Describe the surface, its rough size and its condition, and we will phone to set up a free site visit. A name and a number are enough to send it. Phoning is fine too, and the number is +1 289-307-8672.

Thanks — your request has been received. Thank you. Expect our call on the next open morning to book the site visit. For anything urgent, call +1 289-307-8672.

Fields marked are required. A star marks the two fields we need before we can call you back.

Call Now Get a Free Quote